Parallax P2 Eval Digital Video Out Add-on Board

The P2 Eval Digital Video Out Add-on Board provides an HDMI-type connector which can be used for experimenting with various video standards in your Propeller 2 multicore microcontroller projects.

This board features a pass-through socket that stacks on top of a 26 accessory header on the Propeller 2 Evaluation Board (#64000). It is also compatible with a P2 Edge Module Breadboard (#64020) or P2 Edge Mini Breakout Board (#64019) with a P2 Edge Module (#P2-EC) installed.

Unused signal pins from the video connector are labelled on the PCB next to an unpopulated 0.1 pitch row of 6 pads: CEC, RSVD, SCL, SDA, 5V, HPD.

Beside the 5V output pad is another pad labelled ACC 5V. That is the 5V supply from the accessory socket. Some video monitors require a 5V signal connecting to the 5V pin, so these two pads with 0.1 spacing make that convenient. For example, a 0.1 pitch header could be soldered here, and a shunt plug used when 5V is required to the monitor.

P2 Eval Digital Video Out Add-on Board Features:

• HDMI connector
• Direct connection to CLK-, CLK+, D0-, D0+, D1-, D1+, D2-, D2+
• Plated thru-holes for accessing 6 unused video connector pins
• Plated thru-hole for accessing the 5V supply from the accessory socket
• Center mounting hole
• PCB Dimensions: 1.6 x 0.8 in (4.1 x 2 cm)